Clamping Type Explosion-proof Cable Glands-Yikawei

Our explosion-proof cable seals strictly comply with ATEX and IECEx international explosion-proof standards, are made of high-strength aluminum alloy or stainless steel, and meet the highest explosion-proof level of Ex d IIC T6, with a protection level of IP66/IP68. These products are specifically designed for hazardous flammable and explosive environments in the petroleum, chemical, and natural gas industries, and are suitable for use in Zone 1/Zone 2 hazardous areas. The triple sealing structure (silicone gasket + metal thread + epoxy resin potting), quick installation design, and EMC electromagnetic shielding protection (with an anti-interference capability of up to 30dB) ensure excellent performance. The optional intelligent monitoring model integrates temperature/humidity sensors (supporting 4-20mA signal output). Widely used in harsh environments including oil platforms (salt spray corrosion resistance), chemical plants (resistance to H2S/SO2), underground coal mines (compliant with GB3836), gas stations (anti-static design), and pharmaceutical cleanrooms (compliant with GMP), we provide a complete explosion-proof solution from product selection guidance to on-site installation support.

Sample Order

We would be delighted to offer some products for your project. Please add the required items to the table and send us your inquiries accordingly.

Inquire with us

Stainless Steel Explosion Proof Cable Gland

Clamping Type Explosion-proof Cable Glands

A2 Explosion Proof Cable Gland

BW Armoured Cable Gland

CW Armoured Cable Gland

E1W Armoured Cable Gland

E1FW Armoured Cable Gland

Steel Single Seal Explosion Proof Armoured Cable G

Double Seal Explosion Proof Armoured Cable Gland

Explosion Proof Armoured Inner And Outer Wire Cab

TJ Clamping Type Marine Cable Gland

TH Soldiered Type Marine Cable Gland

Explosion-proof Cable

No products available

Cable joint

Item	Our quotation
MOQ	Low minimum order quantity, depending on the type of cable connector.
Sample	Two units can be provided as free samples for testing.
Ahead of the times	Sample: 3-7 days; Batch orders: 7-15 days for orders below 100,000 pieces, and 30-60 days for orders above 100,000 pieces.
Main products	Cable joint
Custom Logo	Accept
Standard packaging	Inner plastic bag and outer cardboard box

Brief introduction to connectors

●10 years of experience in cable connector production

●5000m² factory area in Dongtai, Jiangsu (near Ningbo, Shanghai, and Yiwu Port)

●Export to many developed and developing countries and regions

●Cable connector certifications: CE, IP68, ROHS, TUV, CCC, ATEX, etc

●Low minimum order quantity, customized service

Frequently Asked Questions for Cable Connector Manufacturers

Q1: What are the key considerations when installing cable connectors?

A: During installation, it is essential to strictly follow the manufacturer's guidelines. For example, for sheathed wire assembly (SWA) connectors, special tools should be used to strip the sheath layer, and ensure that the metal sheathing layer is reliably grounded. The connector structures for different voltage levels (such as low voltage/medium voltage) vary significantly, so it is necessary to refer to the product manual to select the appropriate waterproof sealing rings and crimping process.

Q2: Do cable connectors require specific certification to be used in power facilities?

A: According to the requirements of the "License for Undertaking Installation (Repair, Testing) of Electric Power Facilities", cable joint manufacturers are required to provide type test reports that comply with national standards (such as GB/T 12706). When involving high-voltage scenarios above 66kV, the products also need to pass partial discharge detection and long-term aging tests.

Q3: How to choose the type of cable connector suitable for industrial Ethernet?

A: The decision should be made based on the type of cable shielding: metal connectors with EMI shielding shells should be selected when using STP (shielded twisted pair), while plastic connectors can be used for UTP (unshielded twisted pair). In vibrating environments, M12/M8 series industrial connectors with anti-loose buckles are preferred.

One-stop cable connector solution

We offer OEM production and customization services, so you can find cable connectors that meet your requirements from us. Please feel free to contact us, and you will receive high-quality cable connectors and excellent service.

●10 years of experience in cable connector production.

●Various types of cable connectors are available for selection.

● Read the inventory warehouse for quick delivery.

●5000m² factory area in Dongtai, Jiangsu.

Consultation | If you have any questions, we will reply to you promptly.