Vent Valve Body-Yikawei

The supporting accessories include: stainless steel expansion ring, stainless steel reduction ring, metal hexagonal plug, vent valve, metal hexagonal nut, waterproof connector sheath, waterproof connector grounding strip, nylon hose, metal hose, stainless steel strong clamp, stainless steel rubber strip clamp, round corner slotted driver bit, etc., which can be customized according to needs.

Sample Order

We would be delighted to offer some products for your project. Please add the required items to the table and send us your inquiries accordingly.

Inquire with us

ECT Cable Sealing System

Stainless Steel Union

Fitting Accessories

Hose Accessories

Vent Valve Body

Hose Clamp Steel Ring

Hose

No products available

Cable joint

Our metal hose connector series offers a diverse range of material solutions, including high-strength nylon (PA66 reinforced with 30% glass fiber, tensile strength >180MPa), precision zinc alloy (Zamak 5 compliant with ASTM B86 standards), and 304/316L stainless steel (supplied by Baosteel, with Ni content ranging from 8.1% to 10.1%). Nylon connectors have obtained UL94 V-0 flame retardant certification, making them ideal for lightweight electrical equipment. Zinc alloy connectors feature multi-layer electroplating (nickel + chromium plating ≥15μm), offering both aesthetic appeal and weather resistance, and are widely used in building wiring systems. Stainless steel connectors have passed 500-hour salt spray testing and 3-times pressure burst testing, making them the preferred choice for harsh environments such as petrochemical and marine engineering. All three material variants are equipped with an intelligent traceability system and support optimal material selection based on specific working condition requirements.

Nylon: lightweight and flame retardant (UL94 V-0)

Zinc alloy: corrosion-resistant electroplating for construction

Stainless steel: heavy-duty performance under harsh conditions

Intelligent traceability: complete tracking of production history

Customized solutions: material optimization tailored for specific applications

Item	Our quotation
MOQ	Low minimum order quantity, depending on the type of cable connector.
Sample	Two units can be provided as free samples for testing.
Ahead of the times	Sample: 3-7 days; Batch orders: 7-15 days for orders below 100,000 pieces, and 30-60 days for orders above 100,000 pieces.
Main products	Cable joint
Custom Logo	Accept
Standard packaging	Inner plastic bag and outer cardboard box

Brief introduction to connectors

●10 years of experience in cable connector production

●5000m² factory area in Dongtai, Jiangsu (near Ningbo, Shanghai, and Yiwu Port)

●Export to many developed and developing countries and regions

●Cable connector certifications: CE, IP68, ROHS, TUV, CCC, ATEX, etc

●Low minimum order quantity, customized service

Frequently Asked Questions for Cable Connector Manufacturers

Q1: What are the key considerations when installing cable connectors?

A: During installation, it is essential to strictly follow the manufacturer's guidelines. For example, for sheathed wire assembly (SWA) connectors, special tools should be used to strip the sheath layer, and ensure that the metal sheathing layer is reliably grounded. The connector structures for different voltage levels (such as low voltage/medium voltage) vary significantly, so it is necessary to refer to the product manual to select the appropriate waterproof sealing rings and crimping process.

Q2: Do cable connectors require specific certification to be used in power facilities?

A: According to the requirements of the "License for Undertaking Installation (Repair, Testing) of Electric Power Facilities", cable joint manufacturers are required to provide type test reports that comply with national standards (such as GB/T 12706). When involving high-voltage scenarios above 66kV, the products also need to pass partial discharge detection and long-term aging tests.

Q3: How to choose the type of cable connector suitable for industrial Ethernet?

A: The decision should be made based on the type of cable shielding: metal connectors with EMI shielding shells should be selected when using STP (shielded twisted pair), while plastic connectors can be used for UTP (unshielded twisted pair). In vibrating environments, M12/M8 series industrial connectors with anti-loose buckles are preferred.

One-stop cable connector solution

We offer OEM production and customization services, so you can find cable connectors that meet your requirements from us. Please feel free to contact us, and you will receive high-quality cable connectors and excellent service.

●10 years of experience in cable connector production.

●Various types of cable connectors are available for selection.

● Read the inventory warehouse for quick delivery.

●5000m² factory area in Dongtai, Jiangsu.

Consultation | If you have any questions, we will reply to you promptly.